P

plastic soul

Active Member
Seriously need some help with this, tested compression today, front glow plug nut snapped off plug.
Tried an easy out and this snapped leaving it in the plug flush with nothing to grab onto!!!:eek:

I have thought about welding on a little nut to get easy out...out
ot drilling but I know this will need serious carbide tip drills...

Don't fancy taking the head off....!

Any suggestions greatly appreciated
 
My 300 TDi started quite happily last winter at -9 degrees with no glow plugs at all - relay had broken and it took me a week to get a new one!

I'd want to get it fixed if it were mine, but hopefully reassures to know it's not a 'has to be now' job
 
snapped one in the vag yesterday :/

Will try whacking a hex into it and seeing if it will grip, else it's not worth taking the head off for.
 
Same happened on my last 300tdi.
Just left it in and never had any problems at all - even though temps at the time dropped down to -14. It'll be reet. :)
 
You must log in or register to reply here.

Similar threads

H
Glow plug heater
Replies
2
Views
432
Andy Warren
Andy Warren
C
Glow plug snapped
Replies
1
Views
1K
Nodge68
Nodge68
G
Glow Plug question for early model Series 2A Diesel
Replies
16
Views
3K
Guidoma
G
G
MAP sensor Snapped Off
Replies
3
Views
2K
Nodge68
Nodge68
AH-4x4
200tdi Glow Plug - Snapped
Replies
17
Views
2K
nobber
nobber