Codbasher

Codbasher

New Member
Need to get underneath the old girl to give the gearbox a good clean to see where oil is seeping from....

Now, apart from shaft seals are there any other seals that could be replaced with the box in situ, also, there seems to be about 3 drain plugs??

Box is a standard s3 one..

So could someone tell me which are drains, and where the filling ones are (Will I need to remove floor etc) and what sort of oil goes where, got the London to Brighton coming up soonish, and wanna do it all under me own steam etc....
 
All yo need to know here:
Series III

I use a length of washing machine hose & a Funnel. I take the seat bases out and access panels. 2 people is easier. 1 to put the hose in the filler holes and the other to fill the funnel.
Mine leaked fron the handbrake oil seal, making the handbrake useless as well.
EP90 Oil only.
 
no need to do all that - i use a small 1.5litre garden pressure sprayer with a hose and tap on the tube - pressurise it and then just watch it fill - dead easy :D

Dont forget to remove the spray nozzle. It can all be done from underneath:D:D:D
 
gl5 eats yer syncros and any other bronze bits..it should have the spec on the bottle
 
ere slob - yu sure its the GL4 that eats the syncros and not GL5?

I think yu got it wrong wiv ya last post.
 
You must log in or register to reply here.

Similar threads

P
FL2 SD4 Auto Gearbox Swap
Replies
2
Views
257
Hippo
Hippo
C
Gearbox fragments
2
Replies
25
Views
2K
Chonker
C
A
One Piece Door Seals
Replies
9
Views
597
dag019
dag019
S
gearbox mounts
Replies
7
Views
766
Wildefalcon
W
S
Location of Relay Box
Replies
3
Views
328
Wildefalcon
W