Rebuild of the S2a is near complete.
However neither the water temp or fuel work - the needles dont move.
12v system neg. earth.
Complete new wiring. New volage regulator.
If I removing the sender wire and connect to earth the appropriate gauge reads max.
Fuelsnder I found to be green contacts inside, cleaned it up,checked that the resitance changes as the float arm moves and it did. Reconnect but still nothing. Added an additional earth wire from the float mounting screw.

So I is now stuck - going to check the polarity of the Votage Stabiliser to see if I have it wired back to front.

Any other tips? I've order new temp. sender.

Faulty new voltage stabiliser. Back in action

priorz said:

iv changed my voltage stabilizer on my s3,still no luck on all 3 gauges any ideas?

Click to expand...

They're broke. Hello.

priorz said:

yeah hello cock head,wantin advice

Click to expand...

Well spunk breath...you will get lots of advice with that attitude. There is an 'Introduce Yourself' section...and you may want to start your own thread rather than randomly posting on someone elses..you fat retarded gibbon shagger.

Welcome.

priorz said:

yeah hello, I'm licking my own cock head,wantin advice about eating my mothers pussy..storm you are the most handsome man in staffordshire

Click to expand...

You might learn how to edit too.