brendymtsderry

New Member
hi ya all, having more electric problems with my p38 again.
the jeep drives the best but it keeps saying fuse 10 and fuse 17 fail, but i've checked the fuses and they both intact.
also the radio. i've no sound from the speakers the radio works ok, cause i removed it yesterday and put it into her freelander and sounds works there.
once i put the radio back in again i have a new fault "fuel gauge"
when i put the key in the gauge works for about 3 sec's but then drops down again.
anyone have any idea's? will she have an amp in her and where is it?
 
hi ya all, having more electric problems with my p38 again.
the jeep drives the best but it keeps saying fuse 10 and fuse 17 fail, but i've checked the fuses and they both intact.
also the radio. i've no sound from the speakers the radio works ok, cause i removed it yesterday and put it into her freelander and sounds works there.
once i put the radio back in again i have a new fault "fuel gauge"
when i put the key in the gauge works for about 3 sec's but then drops down again.
anyone have any idea's? will she have an amp in her and where is it?

Others may be more knowledgeable on this one. But it sounds to me like you have a bad connection to whatever those fuses feed. The ECU is picking up a no power and flashing up the message. If you look at Rave and trace the connection to the ECU these fuses feed that maybe the cause.
 
Had a quick look at Rave it depends what year vehicle you have. But fuse 17 feeds quite a lot of systems. Fuse 10 seems to be only used for power seats.
 

Similar threads