R

rabbo10

Member

• Feb 22, 2016

• #1

Gents i have a fuel problem with my td5 disco .i got to keep bleeding it wot a pain it is replaced pump and return valve. Will it be pressure reg in engine

 

L

Lighthouse

Member

• Feb 22, 2016

• #2

Probably injector o rings have gone

 

R

rabbo10

Member

• Feb 22, 2016

• #3

Oh after i bleed it the truck is ok then .is that much off a job if it is that

 

R

rabbo10

Member

• Feb 22, 2016

• #4

It also sounds lije not holding pressure .

 

L

Lighthouse

Member

• Feb 22, 2016

• #5

It sounds like injector seals, how good are you with a spanner it's quite an involved job.

 

R

rabbo10

Member

• Feb 23, 2016

• #6

Yea i am ok 15 years in the garage .ok cheers

 

raywin

Well-Known Member

• Feb 23, 2016

• #7

rabbo10 said:

Yea i am ok 15 years in the garage .ok cheers

Click to expand...

This seems like a TD5 disease take a look at:
https://www.landyzone.co.uk/land-ro...the-little-orange-chappy.296215/#post-3684965
May be something helpful for you there.

 

L

Lighthouse

Member

• Feb 23, 2016

• #8

rabbo10 said:

Yea i am ok 15 years in the garage .ok cheers

Click to expand...

it will be easy then for you, its rocker cover off, injectors out and then change o rings and washers and torque them all back in.

Each injector is coded to each cycler so they must go back in the right place.

I had an issue when i did men that one of th new washers from the dealer had a slight nic in it car stopped after 10 miles so check them carefully.

 

R

rabbo10

Member

• Mar 12, 2016

• #9

Just been into landrover and they said seals are ok ,would it be the throttle switch on the pedal