marccleave
Active Member
Take it apart, clean up all the threads and joins. If its the fuel pipe (part where rubber hose joins from pump looks wet) then if you can then cut an inch or so off the pipe and then push it over and tighten the jubilee clip.
marccleave
Active Member
Ah right. Put out your cigar, cloth underneath, take it apart and get cleaning then! 
marccleave
Active Member
I don't think so! Don't remember any in mine.
What might have happened is a little bit of corrosion has occurred between the different parts, expanded and pushed a tiny gap enough for petrol to leak through.
When you clean everything, threads, pipe, etc blah blah blah then hopefully you get a nice seal! No leaky petrol and it goes into the carburettor as originally intended.
What might have happened is a little bit of corrosion has occurred between the different parts, expanded and pushed a tiny gap enough for petrol to leak through.
When you clean everything, threads, pipe, etc blah blah blah then hopefully you get a nice seal! No leaky petrol and it goes into the carburettor as originally intended.
