R

ROY SIMPSON

Active Member

• Jun 19, 2017

• #1

What are disco2 outer front wings made from and is it possible for repair shops to weld pins to them to pull out dents.
Thanks for your replies

 

Shimsteriom

Master Procrastinator

• Jun 19, 2017

• #2

Would it not be easier to get a new (2nd hand) wing if it needs that much work?

 

brian47

Well-Known Member

• Jun 19, 2017

• #3

Disco 2 outer wings are alloy. The only steel bits are the four side doors, the roof and the floor, in short the only bits of the body which rusts. I haven't looked too closely at the sills, but I would presume that there is some steel in there somewhere.

 

R

ROY SIMPSON

Active Member

• Jun 20, 2017

• #4

Recently took my accident damaged disco (not my fault) to other parties insurers repair shop for inspection prior to repair where inspector said they could pull out dent using described procedure.
Just wondered how feasible this was given that I thought but was not sure wings are alloy.
Thanks for your replies.

 

neilly

Well-Known Member

• Jun 20, 2017

• #5

ROY SIMPSON said:

where inspector said they could pull out dent using described procedure.

Click to expand...

As long as they repair it to the satisfactory level, I would not worry how they do it. That is their problem and the other parties insurance cost issue.

Cheers