andyschleckscheshirecat

Well-Known Member

Full Member

• Sep 12, 2020

• #1

Hi all

Hope all is well

I am today going to change the front relief valve in the drivers wheel well

What I wish to know is that I have read on another forum that when the person who removed the valve he switched on the vehicle that in turn started the compressor that blew air through the line removing any possibly dust between the valve that sits in front of the compressor and the front of the vehicle in the air line

If I did this will I damage anything or is it not advisable doing this?

Regards

 

L

lynall

Well-Known Member

Full Member

• Sep 12, 2020

• #2

I would just replace and see how it goes, you can get valve rebuild kits off of ebay, under 20 quid gives you the seals for all three valves.

 

andyschleckscheshirecat

Well-Known Member

Full Member

• Sep 12, 2020

• #3

Cheers, valve replaced normal service resumes now. The original one i am going to rebuild now with the seal kit and keep as a spare

 

Nodge68

Well-Known Member

• Sep 14, 2020

• #4

andyschleckscheshirecat said:

Cheers, valve replaced normal service resumes now. The original one i am going to rebuild now with the seal kit and keep as a spare

Click to expand...

I rebuild all mine in the 3 years I had it.

 

andyschleckscheshirecat

Well-Known Member

Full Member

• Sep 14, 2020

• #5

Nodge68 said:

I rebuild all mine in the 3 years I had it.

Click to expand...

I went out and bought every air suspension related item ha compressor, all valves etc i am now beginning to replace every item