CraigP38

Active Member

• Mar 17, 2009

• #1

Good morning all
Can some one tell me why the front radous arm bush bolts are fitted from the inside out so as to make it impossible to remove them without cutting them or removing the anti roll bars? and once cut can I then fit them from the outside in?

Thanks Craig

 

A

andy 0352

New Member

• Mar 17, 2009

• #2

they are fitted that way round,so if the nut comes loose there is something to stop the bolt dropping out while driving

 

classic kev

Well-Known Member

• Mar 17, 2009

• #3

The bolts on the front radius arms on a Classic are torqued up to somewhere near 150ftlb so I'd be rather surprised if the nuts could come off, but it is a fair point.

 

Tervueren

New Member

• Mar 17, 2009

• #4

Drill and splitpin or 'R' clip

 

B

Beast o Bodmin

Banned

• Mar 17, 2009

• #5

refit as designed or its a mod and if it goes tits up and ya end up in a river.....