E

Ell6969

Member

• Jul 10, 2014

• #1

Afternoon, could someone possibly help me if they had had any similar issues.
I have just replaced the front drivers door on my 2000 P38 DHSE, not a bad job to do i thought until i came to put the window down after replacement. I seem to have lost every bit of power to the door, no central locking (although i can lock on key ok), no electric window or door mirror working. I have checked that i have a good earth to the door outstation. Nothing obvious, all plugs secure etc. Do i simply need to reset something ?
Any advice will be gratefully received. Thank you Elliot

 

Datatek

Well-Known Member

• Jul 10, 2014

• #2

Broken wire between the door and the A post? Did you use the original outstation?

 

E

Ell6969

Member

• Jul 10, 2014

• #3

Used original outstation too. Might try another outstation first.

 

wammers

No longer with us, RIP

Donater

• Jul 11, 2014

• #4

Diagnostics should tell you where the problem is. Did you disconnect the battery before you stripped the door?

 

E

Ell6969

Member

• Jul 11, 2014

• #5

Thank you for the response, I didnt disconnect the battery before replacing the door.

 

E

Ell6969

Member

• Jul 11, 2014

• #6

How would i resolve ? Do i need to reset something ? Thank you

 

wammers

No longer with us, RIP

Donater

• Jul 11, 2014

• #7

Ell6969 said:

How would i resolve ? Do i need to reset something ? Thank you

Click to expand...

Golden rule is ALWAYS disconnect battery before disconnecting or connecting ANY electrical item. Told you, stick it on a Nanocom or similar see what comes up. Maybe needs the outstation memory reading and clearing. Diagnostics should tell you why the outstation is not communicating with the BECM. Could just be a broken wire as Keith said.

 

E

Ell6969

Member

• Jul 11, 2014

• #8

Thank you, booked in to the local Land Rover specialist next week. Just need to get the diff issue sorted in order to get me there now !!