My1988 90 CSW has got lots of holes in the front cross member so I want to fit a new one.
To make sure I am looking at the right bit, it is a round section 100 mm diameter which bolts across the chassis via two oblong plates.
Where do I get the best deal and is it an easy job to do.
It looks like a simple job of unbolting the eight bolts and refitting the new one, but you just know that with a Landy sometimes things aren't always that easy, any tips on fitting appreciated.
Thanks
To make sure I am looking at the right bit, it is a round section 100 mm diameter which bolts across the chassis via two oblong plates.
Where do I get the best deal and is it an easy job to do.
It looks like a simple job of unbolting the eight bolts and refitting the new one, but you just know that with a Landy sometimes things aren't always that easy, any tips on fitting appreciated.
Thanks