M

mudinuri

Active Member

• Apr 20, 2019

• #1

I"ve been reading the thread regarding this problem becaue my TC and Hill Descent warning lights come on.
It used to be very ocassionally but now it"s a daily occurence. One member said to select reverse with ignition on, engine off. So if the TC/Descent lights come on when you do this does that mean it"s the Reverse Light Switch at fault. IS IT STILL SAFE TO DRIVE WITH THESE LIGHTS ON?
Mines a 2003 TD4 AUTOMATIC.
cheers

 

Nodge68

Well-Known Member

• Apr 20, 2019

• #2

mudinuri said:

IS IT STILL SAFE TO DRIVE WITH THESE LIGHTS ON?

Click to expand...

It's most likely that the brake lights switch is faulty.

The bakes will still work, but special programmes like TC HDC will be disabled.

 

M

mudinuri

Active Member

• Apr 21, 2019

• #3

Thanks for that Nodge68. Is changing a Brake Light Switch a job I can do on the drive? and will the brakes need bleeding after fitting?

 

Madmustang

Well-Known Member

• Apr 21, 2019

• #4

Yes it can be done on the drive although I had to take the drivers seat out so I didn't break my back trying to fit one. No you don't need to bleed the brakes as it just slots in then reconnect the wiring connector

 

M

mudinuri

Active Member

• Apr 21, 2019

• #5

Thanks Madmustang.