bloem

Member
hi there new to this.lol I have a freelander td4 2001 .its the one with bmw 2td motor.well here it go to make a long story sort,,,,,car drove fine and was park at a mall then fail to start the fist time ,{crank no start)left it for 30 min en then start ,drove fine for a week .same story stop went in to the house came out fail to start .(crank no start) left for 30 min start fine.week later drove and then park the car ,got back in the car started reversed 5meter went forward 4 meter car cut out ,died on the spot on waring what so ever,(crank no start)....towed it home.
replaced fuel pump in tank ,pump and filter on left front eng-bay....replaced crank sensor. pressure reglater on the bosch mec pump .
service fuel injectors ,,,,,,,
did test with delpi but no faults found (scan test)
still crank no start ,
other problem found,was glow plug relay work on test (delpi obd2) but does not work when done with normal way of start .
5v on all sensors ,cam,crank.air.....injector has 12v on ground but on the leads only shows 1 v when leads are tested... I am not getting diesel in the injectors so car don't what to start..ps checked all relays an fuses all good <does any one have diagram or schematic (wiring from ECU )for this free lander td 4 2001
 
hi there new to this.lol I have a freelander td4 2001 .its the one with bmw 2td motor.well here it go to make a long story sort,,,,,car drove fine and was park at a mall then fail to start the fist time ,{crank no start)left it for 30 min en then start ,drove fine for a week .same story stop went in to the house came out fail to start .(crank no start) left for 30 min start fine.week later drove and then park the car ,got back in the car started reversed 5meter went forward 4 meter car cut out ,died on the spot on waring what so ever,(crank no start)....towed it home.
replaced fuel pump in tank ,pump and filter on left front eng-bay....replaced crank sensor. pressure reglater on the bosch mec pump .
service fuel injectors ,,,,,,,
did test with delpi but no faults found (scan test)
still crank no start ,
other problem found,was glow plug relay work on test (delpi obd2) but does not work when done with normal way of start .
5v on all sensors ,cam,crank.air.....injector has 12v on ground but on the leads only shows 1 v when leads are tested... I am not getting diesel in the injectors so car don't what to start..ps checked all relays an fuses all good <does any one have diagram or schematic (wiring from ECU )for this free lander td 4 2001
Have you resolved the issue?? I have exactly the same symptoms, I have not traced the fault yet.

Regards
 

Similar threads