S

stephb86

New Member

• Oct 21, 2013

• #1

Hello

Im after abit if advice to diagnose my freelander problem.

I have to start my freelander with the clutch pressed in. I cannot select a gear and its as if the clutch is holding one of the gears.

Is this a gearbox fault or clutch fault?

Any advice would be helpful

thanks

S.Broatch

 

SES88

Well-Known Member

• Oct 21, 2013

• #2

Clutch slave bearing maybe, knackered hydraulics, knackered flywheel or knackered clutch...one of them. Either one will involve at least a new clutch, but doing the rest at the same time is recommended.

 

Epicuser

Ex Freelander Owner

• Oct 21, 2013

• #3

stephb86 said:

I have to start my freelander with the clutch pressed in.

Click to expand...

This normal on many new cars, but alas not on a Freelander 1....

 

Spacemonkey...

Well-Known Member

• Oct 21, 2013

• #4

If you can still do clutchless changes by matching the revs then that would point to a clutch slave problem IMO.

 

Freelaner

Landy Driver

• Oct 21, 2013

• #5

sounds like a gearbox fault to me


have you seen the "introduce yourself" section?

 

dasgas

New Member

• Oct 22, 2013

• #6

how long have you had the caris the clutch pedal very bigthis sounds like a automatic

 

kev1nlm

Active Member

• Oct 22, 2013

• #7

it sounds like it could be a hydraulic fault, can you take it out of gear with the engine switched off?