mad geordies
New Member
i just got a y reg freelander 1800 3 door, nice motor but, just bought the back box and centre exhaust went to fit it and the front part is knacked,
there is a cat on the downpipe manifold and then flexi pipe is this a second cat? got quoted £230 for this but it seems a bit much
second problem
this car is so hard to push, its like it got the handbrake stuck on, i live on a hill and had to push it down the hill,
had both rear wheels of the floor and checked brakes there fine but when i turn one wheel the other turns oppiste which is good but real stiff to turn, could this be a diff problem
3rd problem
the hill desent stays on the dash, you can play with the switch but doesnt take it off any ideas and will this cause the problem for the second problem above cheers guys
there is a cat on the downpipe manifold and then flexi pipe is this a second cat? got quoted £230 for this but it seems a bit much
second problem
this car is so hard to push, its like it got the handbrake stuck on, i live on a hill and had to push it down the hill,
had both rear wheels of the floor and checked brakes there fine but when i turn one wheel the other turns oppiste which is good but real stiff to turn, could this be a diff problem
3rd problem
the hill desent stays on the dash, you can play with the switch but doesnt take it off any ideas and will this cause the problem for the second problem above cheers guys
