Hi i have a auto freelander 2 that went into limp mode a few weeks ago while driving back from the south of france going up a long incline, when i returned to the uk my local garage found a fault code of P2263, and pending code, P0048, actuator solinoid, sent it away to gave actuator totally rebuilt, at a cost of £200, its been ok for about two weeks or more then yesterday went into limp mode again, same fault code cleared fault again and drove ok today i gave it a real thrashing for about 10 miles to see if it went into limp mode but It did not and runs perfect, i have checked all hoses, electical connections to actuator and linkage, all fine, i did notice at the start of the problem after i first went into limp mode that when idling at traffic lights it would sometimes jump and misfire and surge, any ideas what it can be please as if i take it to the main landrover agents they will prob throw a new turbo on and i will have a bill for about £3000 , and even then it may not cure the fault, turbo comes in fine and roars up to speed in no time.thanks for any clues
 
Worth pursuing the same question on the Freelander section for a better outcome. Have you searched limp mode
IMG_20210926_173133_2~2.jpg
IMG_20210419_105116~2.jpg
 
Welcome to the site. Given the complexity of your problem I suggest that you post it in the Freelander section where you should get some specialist advice and fewer BS responses.
 

Similar threads