All Freelander 1 spares available (most of the time!)

Also a good TD4 engine complete (still in vehicle) and a TD4 MOT failure to clear. Good engine, box (manual) and IRD. Rusted rear subframe.


Please ask, got most stuff on the shelf.

Can deliver large items within 30 miles of South Molton Devon.

Hi Andy - a small handful of requests:

1. Do you have one of the airbox clips to hold the lid securely? If it matters, 1.8 petrol - 2000 model (orange indicators, so pre-mini facelift).

2. Do you have the steel pressing which Land Rover call "Bracket - Roof Finisher" that sits underneath the horizontal plastic trim on top of the tailgate aperture. Part numbers over the years have been DBU100042, DBU100043 and DBU500010 (JLR Classic parts site says all are interchangeable, so age of donor vehicle is unimportant). Candidly, I don't know if I need one yet, but I'm doing the rear door seal soon and fully expect my bracket to be 99.85% rust when I pull everything apart. I don't have a garage space, so I'd need to complete the job in a single dry day - so you have a solid one, I'll grab it "just in case" if the price makes sense..!

3. Everyone except me complains about how heavy the Freelander's steering it. I did the PAS pump last year (it was leaking) and the steering weight is unchanged. Do you have a rack from a car that you absolutely know had decent steering? For the same vehicle as the other two requests.

Postage would be to Kent.

PM'd