andyfreelandy · Feb 1, 2020

Wide range of parts left following several rebuilds.

1.8K engine
3 door shells
3 door sunroof
console
seats
trim
body panels (no tailgates)
lights
electrical
ccu
window ecu
15" wheels
glass

Please ask, I may have it !

Postage costs will be only at cost to me.
Located Near South Molton, Devon.

Pluribus · Feb 1, 2020

Hi Andy

Sorry, I'll say in advance this probably won't go anywhere, as I'm not sure if I want to do the job, but how much is the engine, and what mileage is it on please?

Cheers

Ian

andyfreelandy · Feb 3, 2020

Hi Ian, 115k and £100 collected.

Still in vehicle at the moment so buyer can choose what it comes with, mounts, loom etc.

Landyzonewishbone · Feb 6, 2020

Hello how much for the catalyst please the one which runs underneath the car? Don’t mind if you cut it as I can weld it this end..
it needs to have kat009 stamped on it
Thank you

andyfreelandy · Feb 6, 2020

Hi,
Will check on the stamping. It may well be an aftermarket one.
Thanks

Landyzonewishbone · Feb 7, 2020

That would be brilliant thank you.. I am willing to pay £200 delivered to me I’m in Colchester Essex

andyfreelandy · Feb 7, 2020

Had a look, no number and rust has damaged the mounting bars so not worth the time to fit I'd say. I bought one of these a while ago which has been fine so far. Apologies but don't want to waste your time

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/191811604988

Bounty · Feb 7, 2020

Wondering if you have any of the end caps off the grab handles? After three of them

andyfreelandy · Feb 7, 2020

Hi, Went to look. Stripping 2 x 3 door Freelanders. The 3 door doesn't have grab handles! Learn sommat every day.
Thanks for enquiry.

Entwhistel · Feb 13, 2020

Afternoon, have you any gearbox linkage rods, from the commercial variant, i think there the same as a three door 1
Cheers Entwhisle

andyfreelandy · Feb 13, 2020

1.8 or TD4?

Entwhistel · Feb 13, 2020

Sorry, me plum. Td4.

andyfreelandy · Feb 13, 2020

Already sold the TD4 gear mech I'm afraid. Sorry

Entwhistel · Feb 13, 2020

No worries, I've been reading that it's a common problem, and there's a Bush fix, I'll investigate it futher.
Cheers thanks again

andyfreelandy · Feb 13, 2020

Muddy mods does a fix it kit I think.

Entwhistel · Feb 14, 2020

Thanks again

John Taylor · Feb 27, 2020

Hello, I was wondering if your Freelander has any side steps fitted? I’m after a set of the original Land Rover Aluminium Side Steps with the black plastic end caps at either end - thanks.

andyfreelandy · Feb 27, 2020

Hi, thanks for message.
Only have a pair of stainless bottle shaped ones that will need new fixing brackets as the rust has eaten them! Side steps are fine though. If interested I'll post pictures.

John Taylor · Feb 27, 2020

andyfreelandy said:
Hi, thanks for message.
Only have a pair of stainless bottle shaped ones that will need new fixing brackets as the rust has eaten them! Side steps are fine though. If interested I'll post pictures.

Hello, Thank you for the quick reply, I think I’ll continue my search for a set of Aluminium ones but best of luck with selling all your other bits.

stemac64 · Feb 28, 2020

Hi Andy, do you have the tailgate handle
Steve

Well-Known Member

Active Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

New Member

Well-Known Member

New Member

Member

Similar threads