i used the transit flywheel with the S2A clutch, i had to slightly enlarge
the bolt holes to make it fit. I used the land rover alternator with
transit pulley.
advice....... make sure u got ALL the parts for the air filter housing
inc the 'trumpet'! it will be REALLY noisy if u dont. i waterproofed all
of the filter housing and made a snorkle to go on the end of the trumpet and
up the screen.
USE the transit plate that sits between the gearbox and engine and MAKE SURE
u spend time making it fit the conversion kit properly! i didn't and had to
rebuild the starter a few times where it got caked in mud!
erm.... remove the osf engine mount thats welded onto the chassis
just found the PDF that comes with the conversion!!! if u email me
markcoe69AThotmailDOTcom i'll send it 2 u!
MC.
"steve" <rollover.f@ukonline.co.uk> wrote in message
news:37j6bgF5ev6kpU1@individual.net...
> dave wrote:
> > On Wed, 16 Feb 2005 18:58:42 GMT, "Mark C."
> > <markcoe69@NOSPAMhotmail.com> wrote:
> >
> >
> >>I done this conversion and used http://www.engineconversions.co.uk/.
the
> >>adaptor plate was spot on. would recommend.
> >>
> >>are u going to be using it for off road? if so my one snapped 3 timing
> >>belts and bent the push rods coz loads of mud gets in the timing
cover.....
> >>beware! otherwise BRILLIANT conversion!
> >>
> >>MC. SIIA swb
> >
> >
> >
> > so what exhaust do you use ?
> >
> > and what about the clutch?
> >
> > also what alternator do i use.? ( i take it this has a built in
> > voltage regulator)
> >
> > anything i oughto be carefull of before i start.
> >
> > cheers
> >
> > andy
> done this ages ago...use tranny downpipe fabricated to same bore pipe
> and a big freeflow silencer (small truck one maybe) you decide where it
> goes...I got mine coming out the nearside just ahead of rear wheel...use
> s3 diesel clutch..kit from engine conversions tells you this amongst
> other stuff...use brass spiggot bush in kit for flywheel...any transit
> alternator will do...best advice I can think of is to get lots of
> soundproofing!!!this is a noisey engine
> best of luck...Steve