K

Kvammen

Guest

• Aug 29, 2005

• #1

Sooo, I have managed to install the engine. It fits just fine. And it
looks as if I have managed to solve the exhaust manifold/steering box
problem. (I have a LHD Series 3 or 2A) Now has the time come for
electric connections to be made between the engine and the rest of the
car. Also the diesel lines have to be routed.

Does anyone have a diagram for this engine? It is a Ford Transit 2,5 NA
diesel from a 1991 van. Any help would be highly appreciated.

 

D

Derek

Guest

• Aug 29, 2005

• #2

"Kvammen" <ajour@keeponliving.net> wrote in message
news:43132758$1@news.broadpark.no...
> Sooo, I have managed to install the engine. It fits just fine. And it
> looks as if I have managed to solve the exhaust manifold/steering box
> problem. (I have a LHD Series 3 or 2A) Now has the time come for
> electric connections to be made between the engine and the rest of the
> car. Also the diesel lines have to be routed.
>
> Does anyone have a diagram for this engine? It is a Ford Transit 2,5 NA
> diesel from a 1991 van. Any help would be highly appreciated.
will these do?? listed as 86 - 94 models second link is a self extracing
archive file ffs scan it for virus just in case - the site is normally very
good but I have nightmares about downloading executables
http://www.carsoft.ru/avtorepair/transit94_25td.pdf
http://www.carsoft.ru/avtorepair/tran_el.exe
I have seen a ford 2.5 conversion in a rangie but it was tight to the bonnet
due to the height of the air intake
Derek
( Rangerover ? I see no Rangerover)

 

K

Kvammen

Guest

• Aug 30, 2005

• #3

Derek wrote:

> will these do?? listed as 86 - 94 models second link is a self extracing
> archive file ffs scan it for virus just in case - the site is normally very
> good but I have nightmares about downloading executables
> http://www.carsoft.ru/avtorepair/transit94_25td.pdf
> http://www.carsoft.ru/avtorepair/tran_el.exe
> I have seen a ford 2.5 conversion in a rangie but it was tight to the bonnet
> due to the height of the air intake
> Derek
> ( Rangerover ? I see no Rangerover)
>
>
Thank you Derek,they were great. Much help though i didn't manage toopen
the .exe-file. Hope it wasn't an X-file ;-)

 

D

Derek

Guest

• Aug 30, 2005

• #4

"Kvammen" <ajour@keeponliving.net> wrote in message
news:4314892a$1@news.broadpark.no...
> Derek wrote:
>
> > will these do?? listed as 86 - 94 models second link is a self extracing
> > archive file ffs scan it for virus just in case - the site is normally
very
> > good but I have nightmares about downloading executables
> > http://www.carsoft.ru/avtorepair/transit94_25td.pdf
> > http://www.carsoft.ru/avtorepair/tran_el.exe
> > I have seen a ford 2.5 conversion in a rangie but it was tight to the
bonnet
> > due to the height of the air intake
> > Derek
> > ( Rangerover ? I see no Rangerover)
> >
> >
> Thank you Derek,they were great. Much help though i didn't manage toopen
> the .exe-file. Hope it wasn't an X-file ;-)
glad to help if it had worked it would have left a transit94_el.PDF file on
your desktop I checked but its for the turbos not a lot of help I did have
the manuals for the series landies on pdf but I'm not sure if I still do - I
should really burn a cd and make a fortune a bit anoraky for a Rangie fan
( and ex owner)
Derek

 

D

Dag

Guest

• Sep 1, 2005

• #5

On Tue, 30 Aug 2005 21:30:26 GMT, "Derek"
<delwattsspamnoman@cwcom.net> wrote:

>glad to help if it had worked it would have left a transit94_el.PDF file on
>your desktop I checked but its for the turbos not a lot of help
>Derek
>

Found it Derek, as you states it was on my desktop. Maybe not exactly
what I needed, but close... oops, have to close down.. thunderstorm
passing...

 

ciderman

Active Member

• Feb 22, 2010

• #6

hi
I have just fitted a 2.5 Di transit engine.
quite a job, but much better than 2 1/4 diesel, and......
no noisier!
throttle response is breath taking compared to the rover oil burner.
well pleased..
i have got a diesel leak though....

 

ciderman

Active Member

• Feb 22, 2010

• #7

Hi
me again
i used the expansion bottle from a 940 volvo/
It looks like it was made by rover.
how do i do a picture of it?