Hi all
well as you can see by the username normally hang out in the posh part of the forum
Well re this post
http://www.landyzone.co.uk/lz/f7/been-look-defender-90-what-should-i-look-out-153768.html
have only gone and bought it, got it at a good price.
c reg 1986
2.5 N/A
no PAS
pick up
defender 90
been under it for 2 day exploring what i have bought and what it needs for MOT
Bought as a non starter with duff starter, has not been moved for at least 5 months let alone run
Have had the starter off cleaned it and all connections and that works.
have discovered the reason for no brakes, front caliper leaking, seal kit fitted and waiting on pistons ( didn't order them at same time as seal kit:frusty:
Short commercial break gotta love Famous four phoned at 16.38 yesterday for a seal kit, seal kit was in my hand at 9.15 this morning, hope they can do the same with the pistons
have fitted a new spring, shock and cage thing< one side had been doen, bits for the other came with it
have also poked around where it needs some welding, rear crossmember and battery tray
will pop some pics up in a bit
now just got to start it, got fuel at injector at good pressure now i have changed the filter
could be a drag behing a John Deere once i have the brakes working...!!
any tips re starting other than big battery
well as you can see by the username normally hang out in the posh part of the forum
Well re this post
http://www.landyzone.co.uk/lz/f7/been-look-defender-90-what-should-i-look-out-153768.html
have only gone and bought it, got it at a good price.
c reg 1986
2.5 N/A
no PAS
pick up
defender 90
been under it for 2 day exploring what i have bought and what it needs for MOT
Bought as a non starter with duff starter, has not been moved for at least 5 months let alone run
Have had the starter off cleaned it and all connections and that works.
have discovered the reason for no brakes, front caliper leaking, seal kit fitted and waiting on pistons ( didn't order them at same time as seal kit:frusty:
Short commercial break gotta love Famous four phoned at 16.38 yesterday for a seal kit, seal kit was in my hand at 9.15 this morning, hope they can do the same with the pistons
have fitted a new spring, shock and cage thing< one side had been doen, bits for the other came with it
have also poked around where it needs some welding, rear crossmember and battery tray
will pop some pics up in a bit
now just got to start it, got fuel at injector at good pressure now i have changed the filter
could be a drag behing a John Deere once i have the brakes working...!!
any tips re starting other than big battery
Last edited: