mozz smith

Well-Known Member
:crazy_driver: HI LADS I NEED TO FITA NEW CLOCK IN THE DASH , SIMPLE INSTRUCTIONS AND EASIEST WAY TO DO IT PLEASE ????????????? ALL HELP WILL BE GLADLY WELCOME ,,THANKS mozz :):):):) :):crazy_driver:
thats they clock to the left of coin tray ...cheers
 
:crazy_driver: HI LADS I NEED TO FITA NEW CLOCK IN THE DASH , SIMPLE INSTRUCTIONS AND EASIEST WAY TO DO IT PLEASE ????????????? ALL HELP WILL BE GLADLY WELCOME ,,THANKS mozz :):):):) :):crazy_driver:
thats they clock to the left of coin tray ...cheers
Mozz, it's just possible to pop it out if you pull the radio out. the proper way involves removing the instrument binacle, and loads of other bits to get the switch panel out. I think there is a write up on RANGEROVERS.NET HOME
 
Official way is to remove the centre fascia and pop the clock out the front from the rear...

Not sure of any short cut methods....as it is held in place from behind with sprung clips IIRC

As Datatek says, you *could* get to it with Radio removed!!!
 
Official way is to remove the centre fascia and pop the clock out the front from the rear...

Not sure of any short cut methods....as it is held in place from behind with sprung clips IIRC

As Datatek says, you *could* get to it with Radio removed!!![/quote]
I did mine, but it's not easy and impossible if you have big hands:eek:
 
Think you can get at it by removing L/H side panel but don't quote me on that.
 
It'd be easier if you just got a watch from pound shop, removed the straps and glued it over the clock. ;)
 
It'd be easier if you just got a watch from pound shop, removed the straps and glued it over the clock. ;)

I fitted a new clock but the pendulum kept hitting the Hevac when i put the brakes on. :D:D:D
 
Glad you put this question in as it's something i was planning to do myself as i have a crack on the face of my clock, but after seeing the answers think i'll put up with the crack, one i'm useless with crowbar i'll have nothing left:D:D and my hands are to big to go through the hole where the radio is so got no chance that way. and as for stripping out the dash gonna give that a definate miss, good luck to you mozz if you find easy way let me know. please.:(
 
I fitted a new clock but the pendulum kept hitting the Hevac when i put the brakes on. :D:D:D

Have you tried mounting one of these to your bonnet?

RD15Holland4.png


It'll be the only part on a Landy that never breaks.
 
What the heck happened to my post?? first it appeared 3 times...now none at all...

Just to put Wammers quote in context...

Hence the 'could' is in Asterix's (what is the plural of Asterix....Asterixs, Asterix's, Axterixies, asterixi ??)
:D

Was my original post!
 
It isn't just me who is finding the forums to be slightly glitchy today then?

Although that asterixesesesesesesesesesesesesesesse nonsense is because Mr V8 failed at quote editing and in turn had tags that didn't terminate correctly.
 
It isn't just me who is finding the forums to be slightly glitchy today then?

Although that asterixesesesesesesesesesesesesesesse nonsense is because Mr V8 failed at quote editing and in turn had tags that didn't terminate correctly.
Yes....very much so...

So what did I do wrong...not close the ] properly...?
 
Yes....very much so...

So what did I do wrong...not close the ] properly...?

You trimmed out the end close tags but not open quote tags. Some forum software will detect an open quote and be all "well hold on a second there son, are you sure you want to do that? It'll cause an awful mess."

Those posts were lost to buggery, but as Wamjam quoted the posts it carried over the bad tagging.
 
You trimmed out the end close tags but not open quote tags. Some forum software will detect an open quote and be all "well hold on a second there son, are you sure you want to do that? It'll cause an awful mess."

Those posts were lost to buggery, but as Wamjam quoted the posts it carried over the bad tagging.
I'll just nod my head knowingly will having a glazed look over my eyes....

My bad to the Mods out there...sorry for the screw up!!:eek:
 
I'll just nod my head knowingly will having a glazed look over my eyes....

My bad to the Mods out there...sorry for the screw up!!:eek:
Nothing you did as far as I can see Ant, the site was stripping bits off quotes before it went mad and responding incredibly slowly:confused:
 

Similar threads