richard critchley
Member
can any of you help me i looking at purchasing so sparco r100 seats and some harnesses for my 90 but need advice on where to mount the harnesses
cheers
cheers
richard critchley
Member
local club but nothing serious mainly road use
richard critchley
Member
right pita ?
I have aftermarket bucket seats & harnesses in mine 3 point harnesses bwt
1 mount behind the seat,1 down the B pillar & 1 on the original centre mount
all with strengthening plates, The pain was fitting the seat mounts
I modified the original seat mounts to suit the new seats had to cut & re-weld
the centre bar to enable the seat to slide back & forth then drill them to suit
the new seats pita right enough but worth the agro.
1 mount behind the seat,1 down the B pillar & 1 on the original centre mount
all with strengthening plates, The pain was fitting the seat mounts
I modified the original seat mounts to suit the new seats had to cut & re-weld
the centre bar to enable the seat to slide back & forth then drill them to suit
the new seats pita right enough but worth the agro.
richard critchley
Member
looks good where have you mounted your shoulder on the harnesses ?
Cheers buddy.........
They are 3 point harnesses the shoulder one is down the back on the tub attached to strengthening plates
richard critchley
Member
any chance of a pic of it please
When I put it back together I will get some pics not much to see everything is back out
to sort out my sender unit & finish painting the seat box
