batfink82

New Member

• Sep 13, 2006

• #1

Hi, just looking for some ideas.....I’m still trying to work out how i connect my original LR manifold to a tractor silencer. The silencer has been hung underneath the passenger seat so I only need a short length of pipe. But the problem comes in the bore size change. The manifold has an internal diameter of 35mm, whereas the tractor silencer is 65mm internal. Does anyone have any cunning plans of how I can make a joining section? I'm pretty handy with a MIG but I don’t have a pipe bender.

 

S

slob

Well-Known Member

• Sep 13, 2006

• #2

why not buy another box with the right size pipe or even better get a new exhaust they ain't that dear§

 

yella

New Member

• Sep 13, 2006

• #3

send a pm to grey battle bus, i remember him doing this on a series 3(or was it a 2.5td) ah well ask him anyway

 

batfink82

New Member

• Sep 14, 2006

• #4

thanks for the contact. i think i have come up with a way of doing it now.....

http://www.merlinmotorsport.co.uk/EXHAUSTS-JETEX-2.5-Inch-Diameter/c223_224_226/index.html

i'm going to use some bits from merlin motorsport to make up the section i need.