Griffdowg

New Member

• Aug 9, 2009

• #1

Not strictly a V8 question, more a convertion one.

Whilst under my recently aquired 2a lightweight I noticed that I could see the flywheel there does not seem to be a case over it at the bottom. I assume this is not normal?

am i likely to cause this damage?

what to do what to do.

G

 

groenendael

Active Member

• Aug 9, 2009

• #2

There is a small plate that just bolts/screws on.I have seen them advertised on ebayand at auto jumbles.
Definitetly keeps out all the mud/crud and everything else.

 

Griffdowg

New Member

• Aug 9, 2009

• #3

groenendael said:

There is a small plate that just bolts/screws on.I have seen them advertised on ebayand at auto jumbles.
Definitetly keeps out all the mud/crud and everything else.

Click to expand...

sounds like im not alone then

just didn't seem right to me!

thanks

G

 

Griffdowg

New Member

• Aug 9, 2009

• #4

Anyone got any pics of what one should like? I haven't a clue!

G

 

oil dripper

Well-Known Member

• Aug 9, 2009

• #5

think its part number FRC142 bout 20 quid from rimmers

 

Griffdowg

New Member

• Aug 9, 2009

• #6

Dripper - Legend, thank you. Looks exactly right.

I suppose its worth getting one if im using it offroad? seems to make sense.

thanks

G

 

oil dripper

Well-Known Member

• Aug 9, 2009

• #7

just ask iannotts ta mek sure its the right one for yers.he,s got microcat

 

daftpooly

Member

• Aug 10, 2009

• #8

Search e-bay shops for 'Range Rover Heaven' contact the seller directly, i bought one from him for my motor about 2 weeks ago, £8.50 + £2 postage and it was very shiny . The retaining nuts are M6 x 25 (if i remember right) but there are also 2 self centring jobbies, it's obvious where they go when you get the plate. There's also a rubber seal along the top, mine was so tight a fit I just laced on a load of instant gasket.