Hi Guys.

I did a 2 inch lift last weekend and since then I have noticed a rattle, and traced the rattle to the exhaust rattling on the A frame.

I have been told by a friend to just bend the exhaust, but I am not sure how best to do this, or if this is the best way of resolving the issue.

Obviously if left it will end up damaging the exhaust.

Any ideas or tips that I can do to resolve this would be great.

Unless adding some spacers/washers on any of the hanger brackets moves it away sufficiently, bending slightly seems logical

Risk is pipe splitting or collapsing - ideally would have on a work bench, heat with blow torch (shouldn't need to be red hot) and gently bend around a circular former

Station House said:

Unless adding some spacers/washers on any of the hanger brackets moves it away sufficiently, bending slightly seems logical

Risk is pipe splitting or collapsing - ideally would have on a work bench, heat with blow torch (shouldn't need to be red hot) and gently bend around a circular former

Click to expand...

Cheers buddy!