Hi Guys,

I've had the radiator out of my 15p EU3 TD5 for a while now to do some bits and I'm now at the point of reassembly.

Looking at the top diagram below and based off of my memory from taking it apart, there are just the 2 hoses connected to the driver side of the radiator - one to the thermostat and one to the fuel cooler.

However, my radiator has 3 connections there, like the older configuration. Can I just leave one open or should it have a plug in it or something along those lines?

Cheers for any thoughts

Hi, if the bottom port which is fr the oil cooler is not blanked from factory just do it

Good stuff, I'll find something to cover that over - thanks