tyre man dave

Active Member

• May 27, 2015

• #1

hi all.
bit of a daft question
just got myself a 300 defender engine
wanting to fit it into my 110, take 200tdi disco engine out for 109

now then do I need to change engine mounts in my 110 for 300 tdi ones or can I use the ones off the 200 engine

any help advise please

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• May 29, 2015

• #2

I just replaced my 19j with a 300 Tdi Disco engine .. I believe the 19j mounts are similar to 200Tdi. All we needed to do was make a drivers side mount, few welded bits of plate, and used the passenger side as it is. Simple. Mind, we did have to make a downpipe for the exhaust ..

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• May 29, 2015

• #3

Actually, I might still have the 300 Tdi mounts, I'd guess they might bolt on, or can be made to fit with a saw and welder .. I'll have a look over the weekend.

 

vilguy

Do'er of stuff and the like

• May 29, 2015

• #4

Im just about to do the exact same with mine Dave. Ive just bought new mounts as there was a cheap set on ebay

 

tyre man dave

Active Member

• May 29, 2015

• #5

cheers paul.
fingers crossed I may have it sorted. if not will pm you
many thanks

 

tyre man dave

Active Member

• Jun 26, 2015

• #6

HI ALL

slight change in plans. now wanting to fit def engine into 109
what engine mounts do I want
many thanks