tottot

Well-Known Member

• Apr 13, 2024

• #1

Replaced engine mounts 2 years [ish] ago.[ can not remember where from] One has given up. Just a duff one or have others found a quality issue. Replacements vary in cost from a fiver to nigh fifty for original [ so they say] Land Rover.
Any recommendations? For 200tdi.

 

johnlad

Well-Known Member

• Apr 13, 2024

• #2

Glencoyne sell the best ones in my opinion. Avoid the bearmach ones , I fitted them and had vibrations throughout the car, swapped immediately for Glencoyne and problem resolved , been fitted years now and after plenty of hard off roading still appears to be in excellent condition.

 

v8250

Well-Known Member

• Apr 13, 2024

• #3

As above, Glencoyne.

 

dag019

Well-Known Member

• Apr 13, 2024

• #4

I have just got the cheap britpart ones in mine and they have lasted me no problem Probabaly coming up 10 years and have just fitted again with my rebuild after the fire. I fitted the cheap one on the reasoning they were easy enough to replace if needed but have had no issues. Use the same for the gearbox. We will see how long these ones last this time around.

 

110tim

Member

• Apr 13, 2024

• #5

tried after market ones and the vibration was awful, fitted genuine and no problems

 

L

lasher99

Member

• Apr 14, 2024

• #6

Glencoyne fitted here no problems

 

tottot

Well-Known Member

• May 18, 2024

• #7

Did the job the other day, new Britpart mounts fitted. A gearbox mount found to be delaminated.
Driving a whole lot nicer now.

 

dag019

Well-Known Member

• May 18, 2024

• #8

tottot said:

Did the job the other day, new Britpart mounts fitted. A gearbox mount found to be delaminated.
Driving a whole lot nicer now.

Click to expand...

That’s the same as I found. I have never compared so cannot comment on the aftermarket’s producing more vibration. But they are always better than the broken one they are replacing.