rodntod
Active Member
think you might have unplugged the wrong wire. just remove the blue one (i think) and try it again
dogsbody
Very senior member
Yup,
try disconnecting the single, blue wire that runs from the unit up to the window. This is the aerial connector.
I was advised to disconnect the whole unit. The drivers door central locking has never worked off the remote, but does off the key. I was led to believe that the rf receiver would keep sending signals to the BECM as there is something up with the central locking on this door. Would simply disconnecting the antenna resolve this?
Yeah but if you unplug the lot the car won't work. Just the blue will do it. You need a new door lock.
Its a 96 HSE
Blue is unplugged, new lock time then, thank god they are cheap! Ridiculously so for a P38!!
MY96 shouldnt have friendly resync.So If you disconnect the RF receiver and then enter the EKA code the vehicle should start then..But if the switch in the door fails then you will have an issue.Always best to have a working FOB and mechanical key with working door switches as they are a backup for one another.
Datatek
Well-Known Member
New Rf receiver as well as it's probably that that killed the central locking motor.
New Rf receiver as well as it's probably that that killed the central locking motor.
+1 Rf from island 4x4 approx 200 quid and replacement lock from emmotts 50 quid job done
