M

marcellus

New Member
The cable has just snapped on drivers door window
can this be replaced or does it mean a new unit.
I would be grateful for any advice.
 
The Mad Hat Man said:
Crikey - yu are having a few probs arent yu?
Click to expand...

Yer but marcellus aint whining on about it for weeks and weeks and weeks and weeks:D

Try doing a search at the top of the page marc. Its not too drastic ta fix;)
 
marcellus said:
The cable has just snapped on drivers door window
can this be replaced or does it mean a new unit.
I would be grateful for any advice.
Click to expand...

I doubt it's your cable that's snapped, it'll be the little [crappy] plastic guide at the end of the window runner.

Mine went in the driver's side rear door a few weeks ago... took the unit out and fixed it with araldite and zip ties. Stronger than new!

I think i took a picture of it, so will try and post it when i get home, if I can find it.
 
mind ya language Shotgun ;) - we got a twitchy Yellow:( about at the mo..

i'm not sure of the rules - but yu mite get away with "pooey"
 
My drivers window cable has snapped 'n all.Last post I read on it said I'd have to change the whole lot, so if anyone knows if its possible to bodge the cable, they'd make an old tightwad very happy....:p
 
cashybai said:
My drivers window cable has snapped 'n all.Last post I read on it said I'd have to change the whole lot, so if anyone knows if its possible to bodge the cable, they'd make an old tightwad very happy....:p
Click to expand...

Are you sure it's the cable? Have you had it out to see it? The cables themelves are pretty tough.
 
Yep Drew, The motor was sort of graunching and grinding, so had the door panel off. Cable's snapped about in the middle, sods law.Just loath to pay 80 od squids for a new regulator when all I needs 5 bob worth of cable. Hardest parts gonna be finding a strong enough cable of the right diameter..:mad:
 
cashybai said:
Yep Drew, The motor was sort of graunching and grinding, so had the door panel off. Cable's snapped about in the middle, sods law.Just loath to pay 80 od squids for a new regulator when all I needs 5 bob worth of cable. Hardest parts gonna be finding a strong enough cable of the right diameter..:mad:
Click to expand...
JUST USE CRIMPS AND BIT OFF FLEXIBLE 1.5MM CABLE dont worry bout colours tape round with good duct tape and make sure its cable tied all neat. . . .
 
Dont use 1.5mm Cable - just use a butt joint Crimp for joining two wires together - yu can still use the original wire then :)
 
cashybai said:
Will a crimp run through the gubbins alright Mad?
Click to expand...
Yes if ya use common sense, earthling use the in line type and make sure its not fouled by the moving parts ,that damaged it in the first inst. . . .:)
 
Minge & Mad, I'll have to have 'nother look at it, but the snap is slap bang in't middle of cable. If that don't work I'll have to get some push bike gear cable suppose:eek:

Mad: don't talk out your posterior, it smells enough in here..:D
 
cashybai said:
Minge & Mad, I'll have to have 'nother look at it, but the snap is slap bang in't middle of cable. If that don't work I'll have to get some push bike gear cable suppose:eek:

Mad: don't talk out your posterior, it smells enough in here..:D
Click to expand...

yu ok - i not in the bar - noone wud talk to me (witter, whinge,cry etc)
 
You must log in or register to reply here.

Similar threads

J
FL1 Electric Windows
Replies
1
Views
277
Alibro
Alibro
A
Freelander 1 td4 BCU
Replies
0
Views
399
Alby54
A
L
Back Door Woe
Replies
4
Views
347
L322 sufferer
L
J
External Window Seal
Replies
0
Views
236
jamesneilson268
J
johnnyt
Central locking
Replies
2
Views
648
johnnyt
johnnyt