adamnbecky2010
New Member
hi people ive just read a post which says you have to have your siren connected for the eka code to work is this correct ???
hi people ive just read a post which says you have to have your siren connected for the eka code to work is this correct ???
Yes it is,plus all panels including bonnet closed.hi people ive just read a post which says you have to have your siren connected for the eka code to work is this correct ???
Yes it is,plus all panels including bonnet closed.
everytime i turn the key for the eka procedure should there be a indicator flash or a beep or something to tell me im doing the eka correct ???
so im guessing then as mine only flashes on the first sequence my locks not sending the signal to the bcem
Only if it has the B-Bus sounder I think.hi people ive just read a post which says you have to have your siren connected for the eka code to work is this correct ???
right so ive just entered the four turns to the left before i start the eka procedure and every time i returned the indicators flashed once but no matter hnow many times i try the right turn nothung flashes do you think the unlock microswitch is kaput
ive checked both white plugs drivers side and passenger side and all the becm wires seem clean and water damage free i had both seats out earlier this week and checked them for damage
Battery backed up sounder. The BECM needs to see either the BBUS or the down dollar horn connected for the EKA to work.I think it was probably just a belt and braces attitude towards security.Difficult car to steal - even if you have the key sometimes....whats a b-bus sounder?