hammoj28

Active Member

• Dec 28, 2010

• #1

Making up a snorkel at the moment for my 3.9 Defender.

Was going to cut the trumpet off the airbox and weld on a bit of tube so that I can clamp the pipe to it.

Out of interest will this affect anything or is it not too important? Not quite sure why it has the trumpet on it.

This beasty:

Cheers

James.

 

3.5 efi

Well-Known Member

• Dec 28, 2010

• #2

would think it's more a silencer than anything else. have seen them done like this before and doesn't seem to affect them.

 

jamesmartin

Well-Known Member

• Dec 28, 2010

• #3

no effect i run mine with a kn filter direct onto air flow meter

 

hammoj28

Active Member

• Dec 28, 2010

• #4

Cool, cheers for the replies guys. Shall get on with it.

 

joe1972

Well-Known Member

• Dec 28, 2010

• #5

No affect at all. My road RRC has that airbox. My off road RRC has the snorkle modification as you describe.

 

Mr Noisy

Coming in your ears.

• Dec 29, 2010

• #6

i didnt need to weld a tube on.

i just cut it back so it was about 3" long, shoved some hose on as far as possible, then taped it like crazy with insulating tape, then fitted a jubilee clip. was briliant for a few months, until i fitted another battery and it was in the way, so then cut it off and plated it, and welded a tube into the side of it.

cheers

 

hammoj28

Active Member

• Dec 29, 2010

• #7

Haha, my intake is taped up at the moment, need to get some proper piping for it. Think id be aswel just welding tube on as I should have some left over. Cant wait to get it done.lol