Colin from Hull · Dec 7, 2019

Hi
My old laptop has given up and a friend transfered everything off my hardrive onto sticks but i dont seem to have the Eas software on them, can someone send me a link so i can download it again.....Thank You.

Tenebreaux · Dec 7, 2019

http://www.rswsolutions.com/index.php

Colin from Hull · Dec 7, 2019

Hi
This link is to buy the lead and software, then he sends a link and code to download.
I already have thd lead but need the software again.

brianp38dse · Dec 7, 2019

Have a look on Wazzarjnr`s thread hear open drop box and its in there

https://www.landyzone.co.uk/land-ro...lus-other-useful-info-on-range-rovers.322195/

Datatek · Dec 7, 2019

Colin from Hull said:
Hi
This link is to buy the lead and software, then he sends a link and code to download.
I already have thd lead but need the software again.

As a last resort, I can supply it on CD. Or post me a memory stick and I will put the software on it and send it back.

wammers · Dec 7, 2019

Free download. https://www.rswsolutions.com/index.php?option=com_content&view=article&id=53&Itemid=56

Colin from Hull · Dec 7, 2019

Hi
Thanks everyone I have manage to download the software.
My problem now is that it's not initialising. I've got down the comm's menu and clicked one everyone...... ????

Datatek · Dec 8, 2019

Colin from Hull said:
Hi
Thanks everyone I have manage to download the software.
My problem now is that it's not initialising. I've got down the comm's menu and clicked one everyone...... ????

Can you open the EAS software? Clic on OK in the "failure to initialise" panel then you have to go to the top left "EAS Setup" and click to get the pull down menu, select "comms" and then select "Comm #4 which is the one that usually works if you are using a USB the serial adaptor.

Colin from Hull · Dec 8, 2019

Yes using USB adaptor......I've click on every comm from 1 to 12....doesnt even try to contact.... just an instant window saying 'failed on this comm'.
Is there certain software depending on which windows is on the laptop.
Its my partners and quite old old one so not sure whats windows is on it.

brianp38dse · Dec 8, 2019

Did you load the software drivers before plugin in the usb adapter if you did not that will throw it out.

Datatek · Dec 8, 2019

brianp38dse said:
Did you load the software drivers before plugin in the usb adapter if you did not that will throw it out.

As above, if you plugged in the adaptor before loading the software driver, Windows will use a generic driver that will not work.

Jon Dor · Dec 8, 2019

Colin from Hull said:
Hi
Thanks everyone I have manage to download the software.
My problem now is that it's not initialising. I've got down the comm's menu and clicked one everyone...... ????

Hi Colin from Hull.
I have a CD with EAS Software on it and I'm just up the road from you near Beverley. Get in touch if you want to meet up.

Datatek · Dec 8, 2019

Jon Dor said:
Hi Colin from Hull.
I have a CD with EAS Software on it and I'm just up the road from you near Beverley. Get in touch if you want to meet up and you.

He has the EAS software running, just no comms, proably due to the driver for the USB to serial adaptor not being loaded before the adaptor was plugged in.

Jon Dor · Dec 8, 2019

Datatek said:
He has the EAS software running, just no comms, proably due to the driver for the USB to serial adaptor not being loaded before the adaptor was plugged in.

If it's not initialising, wouldn't it be at least worth trying a fresh installation?

Datatek · Dec 8, 2019

Jon Dor said:
If it's not initialising, wouldn't it be at least worth trying a fresh installation?

Unlikely, the software is running. it just cannot find a working comms port and that is almost always a driver/adaptor problem.
A different USB port after installing the drive might help, otherwise it's into the system to delete the incorrect driver and then install the correct driver.

Jon Dor · Dec 8, 2019

OK. Thanks for explaining the necessary drivers sequence.

Colin from Hull · Dec 9, 2019

Hi
Thanks everyone was busy yesterday Christmas duties....
I will try everything suggested tonight after work.
Only one usb port on this laptop, i think i had the cable plugged in the car and laptop then opened the software.
No different when using my old laptop. On my lap i could find which comms port each usb was using. Cant find this info on my partners laptop.

Datatek · Dec 9, 2019

Colin from Hull said:
Hi
Thanks everyone was busy yesterday Christmas duties....
I will try everything suggested tonight after work.
Only one usb port on this laptop, i think i had the cable plugged in the car and laptop then opened the software.
No different when using my old laptop. On my lap i could find which comms port each usb was using. Cant find this info on my partners laptop.

What version of Windows?

wammers · Dec 9, 2019

EASunlock has to have Windows net framework on the computer or it will not work. Also as stated by others the serial to USB adaptor driver MUST be installed before EASunlock is connected to the computer.

Datatek · Dec 9, 2019

wammers said:
EASunlock has to have Windows net framework on the computer or it will not work. Also as stated by others the serial to USB adaptor driver MUST be installed before EASunlock is connected to the computer.

The software loads and opens, so he must have NetFramework.

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

No longer with us, RIP

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

No longer with us, RIP

Well-Known Member

Similar threads