jacckk
Active Member
I recently replaced my front height sensors after I got a fault code from one of them, after replacing them I calibrated the system using some blocks I made. The front left and right sensor seems to have a massive difference between them, I've attached a picture of the Nanocom showing the difference. Is this normal for two brand new sensors to have this much difference?
Secondly whenever I switch off the car it will level and when I return to it the height display will show it being in the access ride height with the standard ride height flashing. Occasionally it will also show as being in the high ride height so that it needs to lower to get to standard. Is that normal?
Can't find any leaks at the valve block/springs and the valve block was refurbished around a year ago.
Thanks.
Secondly whenever I switch off the car it will level and when I return to it the height display will show it being in the access ride height with the standard ride height flashing. Occasionally it will also show as being in the high ride height so that it needs to lower to get to standard. Is that normal?
Can't find any leaks at the valve block/springs and the valve block was refurbished around a year ago.
Thanks.