rubythursday

Member

• Feb 4, 2006

• #1

Thought I had a serious problem as the Rangie was sitting lopsided, and wouldn't level itself. Inspection shows that the link between the rear trailing arm and the height sensor has broken at the top. Can you buy these seperatly? and if so does anyone know the part number? It's a 1993 Classic SE A

Thanks

 

E

eightinavee

Well-Known Member

• Feb 4, 2006

• #2

Not an uncommon thing,the arm is sold as part of the sensor only.To be honest if these are the original sensors then they are probably on their way anyway.The semiconductor tracks wear through inside and give the ecu faulty signals,this can end up with the EAS in fault mode - on the bumpstops.Trouble is it can log faults that are misleading,resulting in big bills that arent necessary.

 

rubythursday

Member

• Feb 4, 2006

• #3

Thanks
Looks like I'll be making something then!

 

M

mosher

New Member

• Feb 4, 2006

• #4

You can always try ebay, someones always breaking a classic and the sensors are usually listed

For example

http://cgi.ebay.co.uk/Range-Rover-Classic-Rear-Ride-Height-Sensor_W0QQitemZ4608760677QQcategoryZ31349QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

rubythursday

Member

• Feb 5, 2006

• #5

Thanks, the one on ebay has done exactly what mine has.
Managed to buy another one from ebay.