davetherhino

New Member
Hi people,
My Freelander1 has an advisory on new mot. My headlights lenses are faded.
So I was wondering what you would recommend putting on? Do I have to just replace them like for
Like or is there a better brighter headlamp I can upgrade.? I have issues with my hands so I would be buying
rather than rubbing down the ones I have. Thanks...

davetherhino
 
It's really not that hard to polish them by hand to be honest but alternatively, use a power polish fitment in a drill...piece of **** to do and far cheaper than replacing lights or bulbs (assuming you have a drill).
 
Hi people,
My Freelander1 has an advisory on new mot. My headlights lenses are faded.
So I was wondering what you would recommend putting on? Do I have to just replace them like for
Like or is there a better brighter headlamp I can upgrade.? I have issues with my hands so I would be buying
rather than rubbing down the ones I have. Thanks...

davetherhino

meguairs do a kit for this have a look at halfrauds
 
Just bought myself a polishing kit for the dremel, got a right hand attachment so easier to use , comes with 3 x inch Velcro pads as I also want to do my headlights

heard that brasso works well

BD4B4FAC-F7D2-43D4-92BC-A575910B8427.jpeg
 
Me too - get some help to do it - BIL asked me what to about his lenses on his CR-V - we (he*) used bicarbonate toothpaste to polish all the crud orft - and it worked a treat :)

I've done the same on our (none LR) daily driver, wouldn't describe the result as a 'treat' but the process certainly improved the clarity of the lenses.
For just £1.00 you won't get better value for money.
 
Thanks everyone for your help. I never thought of doing it with a drill.thought it would be to rough.
I will look out for some discs. Thanks again.
 
I've done the same on our (none LR) daily driver, wouldn't describe the result as a 'treat' but the process certainly improved the clarity of the lenses.
For just £1.00 you won't get better value for money.

+1 on the value ;) - If you're not happy with the results so far, just keep going - that's what BIL did :)
 
Just bought myself a polishing kit for the dremel, got a right hand attachment so easier to use , comes with 3 x inch Velcro pads as I also want to do my headlights

heard that brasso works well

View attachment 198247
Expect the dremel to burn out. I've tried all sorts of stuff from brasso, t cut, toothpaste and the proper stuff sold by Euro car parts. None of it worked that well and the hazing returned fairly quickly.

Col
 
I dunno how bad your hands are - mine are bad enough for me to get rid of my guns - but I used Meguiars back in October before the MOT. It worked fine., 10 minutes a side.
 
Expect the dremel to burn out. I've tried all sorts of stuff from brasso, t cut, toothpaste and the proper stuff sold by Euro car parts. None of it worked that well and the hazing returned fairly quickly.

Col
The coating that’s applied over the polycarbonate headlamp during manufacture has now been removed, ( polished away ).
So the haze will return unfortunately, there’s nothing that can be do about it, other reapplying a protective coating similar to that used when the vehicle left the factory, and the best of luck with that. :)
 
2000 grit wet and dry, use it wet with some soap for lubrication, keep washing the paper in the water/soap. When its all nice and smooth it will look very dull , so , you then buff it up with either a cutting paste or TCut, brasso or similar.
Those restoration kits work but take all day!
Or, save yourself a lot of faff and bring it to a garage, they will have air tools/polishers that make short work of headlamp lenses.
 
2000 grit wet and dry, use it wet with some soap for lubrication, keep washing the paper in the water/soap. When its all nice and smooth it will look very dull , so , you then buff it up with either a cutting paste or TCut, brasso or similar.
Those restoration kits work but take all day!
Or, save yourself a lot of faff and bring it to a garage, they will have air tools/polishers that make short work of headlamp lenses.

many thks

have got air tools, polishers etc so will try, if all else fails will be replacing them with xenons
 

Similar threads