J

Jrichards6

New Member
Recently had a knock on the front end going over bumps. Changed the following due to wear ...
Anti roll bar bushes front and rear
Front and rear anti roll bar links
Terafirma heacy duty steering bars and damper.
None of these made any difference.
Ive just this week changed all the shocks to heavy duty Terafirma onrs and this seems to have made the knock more prevalent... not sure if im in my own head or not.
But is there any other suggestions..
Im currently thinking to check body bushes and engine mounts next.

Knock sounds like its coming from front wheel arch when driving..
Any advice is appreciated
 
No idea what you have but will take a guess at a D2.
Upper and lower ball joints, wheel bearings, spring mounts.
 
Last edited:
Have you checked all the ACE?
I discovered my ram mounts were shot and causing a clunking only occasionally on certain corners / inclines.
Relatively easy fix.
 
swatts70 said:
Have you checked all the ACE?
I discovered my ram mounts were shot and causing a clunking only occasionally on certain corners / inclines.
Relatively easy fix.
Click to expand...
Ace has been removed. Im thinking ball joints or swivel pin preload need to get ot jacked up this am
 
Ball joints would be my guess. Test them with a decent lever. If you do replace them, use a good make, e.g. Lemforder as you don't want to be doing the job twice- it ain't fun!
 
If you have checked the above details described by members! And still Knocking!!
Check the body mount nuts and bolts?
I had one that was so rusted! Nothing was holding to anything??
Engine mounts too!

Kev
 
You must log in or register to reply here.

Similar threads

L
L405 Anti roll bar knock
Replies
2
Views
705
lawr.i.e
L
T
Newbie back again
Replies
6
Views
443
GrumpyGel
GrumpyGel
retrorides
Knock under deceleration and c**p steering.
Replies
0
Views
907
retrorides
retrorides
Hexonxonx
1970 SIIa Ex mod Marshall Ambulance
Replies
17
Views
1K
Hexonxonx
Hexonxonx
R
LED side lights not working
Replies
7
Views
320
xDParis64
xDParis64