Grrrrrr

Technician, Bodgit & Scarper Ltd
Full Member
1995 P38A 2.5 DT.

As some of you know I had to replace the drag link recently. Replaced with Lemforder. I thought all was well but now at 75mph I get a REALLY nasty wobble on the steering wheel that stays until 85mph (done for testing purposes). The weird thing is she runs straight and true and below 70mph is good as gold. Obviously 70mph is the legal limit but I'm worried something is stuffed that will get worse and come and bite me with a vengeance.

So what could possibly have been done wrong that could cause such a vibration when replacing the drag link? Or is it coincidence and something else has reared its ugly head?

Just for background on possible confounding issues:

MoT done a month ago - hence the drag link replacement.
Tyres new a few months ago and all balanced and all wheel alignment done. Was perfect afterwards.
Radius arms bushes done 2 years ago.
Tie rod done a few years ago.
All new dampers (shocks) 2 years ago.
All new air-springs 5 years ago.
Steering damper done about 5 years ago.
 
What about panhard rod bushes, anti roll bar bushes and drop links?
 
What about panhard rod bushes, anti roll bar bushes and drop links?

You think I disturbed them with doing the drag link and now there is play there not evident before? Could be. Thanks, worth checking.
 
Tyres all good! I'll get the wheels checked. Guessing probably a rear one given it takes some speed to show up at the front?

It would be a front mate if it was. Moving a wheel to the rear usually stops it showing up at the steering wheel.
 
I think I might have found the the issue. I think the nearside drag link ball joint might be faulty. The nearside one when twisted slightly clicks when I wiggle it up and down. No movement at all on the offside one which is what I would expect.
 
I think I might have found the the issue. I think the nearside drag link ball joint might be faulty. The nearside one when twisted slightly clicks when I wiggle it up and down. No movement at all on the offside one which is what I would expect.

Looks like you found it then mate
 
I think I might have found the the issue. I think the nearside drag link ball joint might be faulty. The nearside one when twisted slightly clicks when I wiggle it up and down. No movement at all on the offside one which is what I would expect.
And what did I say??? :D:D:D:D:D:D:D:p
 
Hope that's it mate. Just to say the drag link length alters the tracking. So any change between old and new results in change of tracking. The chances of getting the old and new the same length are pretty slim I reckon.
 
Check if the pitman arm is centred correctly. Although in theory the drag link length being altered should just alter the wheel centring it can give the symptoms you state and be cured by a proper alignment - make sure the any place you get it done knows what they're doing on a P38.
 

Similar threads