B

bobtail32

New Member

• Nov 30, 2008

• #1

hi, i have a sill gone on the passengers side of the rangy, i have never done one of these so could do with some knowlege from you guys...
i know you can get a outer sill and a inner seal do i need both? i think i do because there both pretty shot. and do you have to weld this?

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Nov 30, 2008

• #2

bobtail32 said:

i know you can get a outer sill and a inner seal do i need both? i think i do because there both pretty shot. I think yu just answered this

and do you have to weld this? someone has to

Click to expand...

if yu use yu motor offroad, yu can replace the sill with 60mm by 100mm box section. Its on here somewhere.

 

B

bobtail32

New Member

• Nov 30, 2008

• #3

my aim isto get it back on the road, so i need a proper sill. thanks for your help.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Nov 30, 2008

• #4

YRM do both panels for you. You might need to fabricate the front closure panel and the floor support panel. If the sill is shot, its with looking at the bottom of the A pillar at the same time.

 

B

bobtail32

New Member

• Nov 30, 2008

• #5

cheers for the link. i was quoted £65 from land rover and there £20 on that site! what range rover have you got and any modifications?

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Nov 30, 2008

• #6

I havent - I own Tufftee - a bobtailed truck cab Disco, but a lot of the body parts are interchangeable.

I have used a couple of items from YRM and found them very helpful.