Big Phil

Active Member

• Aug 23, 2018

• #1

Yes this subject has been done to death I know but, giving the front end a bit of a clean I got round to the headlights. I found one was a bit loose so gave it a bit of a pull and honestly I could have pulled it off. I think the little bracket next to the grill must be broken, and at the other side it just locates into the push in peg jobby. Lifting the lid the two fixing screws both have seen better days so I will be replacing them and the side bracket.

I have searched the forums and all the areas that might point me to some method of stopping our light fingered friends from stealing them. I have discounted those made of plastic, likewise those that have three self tapping screws to fix them on, a phillips screwdriver in the thiefs pocket and away they go.

So is there any other method that is currently on the market that would deter/stop a prospective thief from having them away. I cannot find anything after trawling the net. As a pensioner the cost of replacements and repairing any damage is quite a worry.

 

L

lynall

Well-Known Member

Full Member

• Aug 23, 2018

• #2

Headlamp guards with proper fixings that can only be got at with the bonnet open?

 

Feathers McGraw

Well-Known Member

• Aug 23, 2018

• #3

https://www.jawengineering.com/page2

 

neilly

Well-Known Member

• Aug 23, 2018

• #4

Feathers McGraw said:

https://www.jawengineering.com/page2

Click to expand...

Good luck, last time I looked iirc, they had discontinued them. So if they are still doing them let us know.

I made my own, in very similar style, as said has been discussed before.

Cheers

 

doriz

Well-Known Member

• Aug 23, 2018

• #5

Headlight theft, is this fake news?

 

dieseldog69

Well-Known Member

LZIR Despatch Agent

• Aug 23, 2018

• #6

doriz said:

Headlight theft, is this fake news?

Click to expand...

No, very real and still very common.

Just look on eBay.co.uk to see how much a few minutes work to remove the headlights can yield.

 

doriz

Well-Known Member

• Aug 23, 2018

• #7

Jesus, £125 a side on the bay

 

brian47

Well-Known Member

• Aug 23, 2018

• #8

I s'pose I was fortunate in that I found some on the bay while they were still being made.
They are the same as the jaw ones and made of a hard stainless steel about 3/16 thick. They don't bend very easily and are fixed under the bonnet.
I was able to give them a coat of touch-up paint before fitting to match the colour of the Disco.

 

Big Phil

Active Member

• Aug 24, 2018

• #9

Brian 47, thanks for the help. I get the top fixing under the bonnet, but how do they fix at the bottom?.

Regards.

 

brian47

Well-Known Member

• Aug 25, 2018

• #10

Big Phil said:

Brian 47, thanks for the help. I get the top fixing under the bonnet, but how do they fix at the bottom?.

Regards.

Click to expand...

They hook down behind the ends of the bumper end trims. The length of the bit which extends down behind the bumper is about 2 or 3 inches, so pulling it out isn't really an option.