mick dodd

Active Member

• Tuesday at 12:15

• #1

Got a new sender marine type 190ohm at top 1ohm at bottom but the smiths gauge goes up on 1ohm & down on 190 ohm some one know what to do ?

 

Rangieman123

Active Member

• Tuesday at 20:23

• #2

Bend the arm at the sender end 180 degrees and bolt it back into the tank " the other way round".
I've done this before. You can solder on some extra material if you can find an old wire coat hanger.

 

Rangieman123

Active Member

• Tuesday at 20:24

• #3

It fools the sender into working in the opposite way.