AJC · Dec 23, 2013

I'm thinking of making my own land anchor. Something simple lightweight and easy to carry.

I'm going to use some 100x100x8 angle with a big hammer plate on top and eyelets to pull it back out

Anyone else made there own? If so, what design did they use? And more to the point, was it fit for purpose?

Thank you

Dan_Trials · Dec 23, 2013

Depends a lot on what it is going in to. With the angle and hammer plates I assume you are talking about the type that is 3 posts tied together rather than the 'ship anchor' style ones?

AJC · Dec 23, 2013

Just one angle that is sledge hammered into the ground basically. I think there might be too much resistance when sledging

Dan_Trials · Dec 23, 2013

AJC said:
Just one angle that is sledge hammered into the ground basically. I think there might be too much resistance when sledging

Hmm I see, and what sort of ground is it going in to?

Nigel-S · Dec 23, 2013

I can imagine the anchor becoming a missile when it flips out the ground

AJC · Dec 23, 2013

I'll knock one up and give it a dummy run

Dan_Trials · Dec 23, 2013

Nigel-S said:
I can imagine the anchor becoming a missile when it flips out the ground

Lol, I was working up to that bit

GINGE · Dec 24, 2013

Speak to 300tdistu.

He makes um, he might tell you what works and dosent. Or just copy the big boys like gigglepin and X eng.

Im sure they tried and failed a few times.

You could copy mine, it folds up into a bag.

Good luck, keep us posted.

AJC · Dec 24, 2013

That's an awesome piece of kit.

I will have a blast at one of them.

Nigel-S · Dec 24, 2013

shame to get mud on it

warrior · Dec 24, 2013

I've bin doing some googling about this, I'd want to make an anchor type one, I asked tdistu for the intentions but he never replied as I was gona buy one of his if I could store it easy,

GINGE · Dec 24, 2013

Too be fair to Stu its his business, thats why i put 'might'

He isn't going to make any money if he just gives away information for free.

warrior · Dec 24, 2013

GINGE said:
Too be fair to Stu its his business, thats why i put 'might'

He isn't going to make any money if he just gives away information for free.

I was wanting to buy one I jus wanted one more info first but never git an answer.

adam300tdi · Dec 24, 2013

ive just got rid ov 1 with my land rover.its hard to explain how it was made.it was 2 bits of u shaped angle iron with a hole drilled thru at the end where a big d link went thru and held them together.then the was 4 triangles cut into the flat of the u section where some home made spikes went to anchoring it down.u layed them flat in a v shape then put the d link thru the hole joining them at the end then banged the spikes thru the holes

blue beasty · Dec 24, 2013

adam300tdi said:
ive just got rid ov 1 with my land rover.its hard to explain how it was made.it was 2 bits of u shaped angle iron with a hole drilled thru at the end where a big d link went thru and held them together.then the was 4 triangles cut into the flat of the u section where some home made spikes went to anchoring it down.u layed them flat in a v shape then put the d link thru the hole joining them at the end then banged the spikes thru the holes

Summink like this....?

Chrisw8 · Dec 24, 2013

ok, i'll ask.....................

what are they for ?

300tdistu · Dec 24, 2013

warrior said:
I've bin doing some googling about this, I'd want to make an anchor type one, I asked tdistu for the intentions but he never replied as I was gona buy one of his if I could store it easy,

Sorry missed your reply as iv not been on line for a few days. Will get you the exact sizes when im back in work on the 27th

300tdistu · Dec 25, 2013

AJC said:
I'm thinking of making my own land anchor. Something simple lightweight and easy to carry.

I'm going to use some 100x100x8 angle with a big hammer plate on top and eyelets to pull it back out

Anyone else made there own? If so, what design did they use? And more to the point, was it fit for purpose?

Thank you

I'v done a lot of testing with different metal box/tube of differant sizes, even some angle iron to find the best and strongest way to make them,#
In my testing I found that....
Tube is nicer to hold on to and throw over your Shoulder to get up muddy banks.
the most important part of a good ground anchor is that piece of flat bar thats sits across the bent tube. Its that doing the actual pulling and all force go through that.
When testing what angles to set the plough i found that shallow angles are better for loose or soft ground and steep angles for clay.

matthew2riches · Dec 25, 2013

Those things really do scare me after seeing one shoot out and through a defender front screen and then tangling itself within the mesh dog guard in the vehicle!

warrior · Dec 25, 2013

300tdistu said:
Sorry missed your reply as iv not been on line for a few days. Will get you the exact sizes when im back in work on the 27th

Cheers pal

Active Member

Well-Known Member

Active Member

Well-Known Member

soft and furry

Active Member

Well-Known Member

Greenlane liker, bobble hat hater

Active Member

soft and furry

Well-Known Member

Greenlane liker, bobble hat hater

Well-Known Member

Active Member

Leaks an prone to bits dropping off

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Similar threads