M

Mattc90

Member

• Dec 24, 2020

• #1

hi I have a discovery 2 td5 on a 2000 i drove it home one night switched it off now wont start in tank not running with ignition on i have already changed fuel pump checked all relays fuses removed fuse boxes and checked for corrosion but no luck I have also checked fuel cut off switch. If I take the top off fuel pump relay and push it over to connect fuel pump runs but still not starting not sure what else would cause it
Any suggestions would be appreciated thanks

 

neilly

Well-Known Member

• Dec 24, 2020

• #2

Hello,

Does it turn the engine over?

Remove your postcode from your details.

Welcome to the Loonyzone.

Cheers

 

M

Mattc90

Member

• Dec 24, 2020

• #3

Hi thanks for the reply not sure how to remove post code ?
And sorry yes it turns over no start and it will fire up on brake cleaner run for a few seconds and cut out

 

M

Mattc90

Member

• Dec 24, 2020

• #4

neilly said:

Hello,

Does it turn the engine over?

Remove your postcode from your details.

Welcome to the Loonyzone.

Cheers

Click to expand...

Have removed post code forgot to mention I have also cheched injector loom to ecu no oil

 

JUKE179r

Well-Known Member

• Dec 24, 2020

• #5

Welcome to the forum.
Do you have any fault codes?

 

M

Mattc90

Member

• Dec 24, 2020

• #6

No fault codes atall

 

JUKE179r

Well-Known Member

• Dec 24, 2020

• #7

Got enough diesel in the tank?
Fuel filter clogged?

 

M

Mattc90

Member

• Dec 24, 2020

• #8

Got 1/4 tank as have put some more in
And no noise from pump with ignition on filter is full would a filter stop pump running it was working when I tired bleed the system with ignition on and pump throttle 5 times thanks matt

 

M

Mattc90

Member

• Dec 24, 2020

• #9

What is involved in ecu swap can i just plug one in and it work