Tylerandthelandy

Tylerandthelandy

New Member
Hi everyone I have a 1997 Land Rover discovery 2.5 litre 300tdi and it’s making funny noises when first going into gear like a clonking noise and a whining noise when moving but not if my I put the clutch down a friend said that may be the turbo
Please help thanks
 
Not the turbo if depressing the clutch affects it.

Welcome.

Sounds like clutch release bearing.

Not automatic is it?
 
Re, clonking, could be bushings, ball joints or even slack in the drive train, does it have a Hardy Spicer or a cushdrive coupling?
 
Henry_b said:
Sounds like worn clutch release bearing! :)
Click to expand...

Copy cat :p

Tylerandthelandy said:
And it’s a manual
Click to expand...

Thought so, but always best to ask ;)

You need to be laid under it with a big F'off pry bar to lever the bushes and joints to see what play there is in them.

If they are tight then look at the drive train, this can manifest itself in the input gear in the transfer box, propshaft splines, worn UJs (there will be vibration accompanying these) and backlash in the differential.

Hope that helps.
 
You must log in or register to reply here.

Similar threads

Padda.116
D2 Transfer Box exploded?
Replies
11
Views
937
MJI
MJI
M
Discovery 4 Diesel Won’t Accelerate – Oil Found in Cylinders”
Replies
8
Views
1K
lynall
L
Lej
Discovery 2 Clutch failure
Replies
2
Views
1K
Lej
Lej
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
6K
miktdish
miktdish
D
Disco 2 Discovery TD5 clutch master cylinder serviceable?
Replies
2
Views
860
DavidGugava
D