So I did some welding on the disco, not realising it has braided hoses!! Yep they went pop!!
So I’ve replaced the hoses
Fired her up n abs light came on, looked at fuses under bonnet the 40amp had popped so replaced popped again! This time I unplugged the plug goin into the abs unit under bonnet, new fuse and was ok, plugged it back it and pop the fuse went again, have I knackered the webco abs unit
Or could problem be further down the line
Kind regards

If you didnt disconnect fully the battery before electric welding you should rule out the ABS ECU by replacing it with a known good unit(which is not expensive) before chasing other issues cos they are very sensitive to voltage spikes .... then if the symptom persists we'll speak again, what's the result of the plip test thoughg?