B

Bugz

Member

• May 31, 2024

• #1

Whilst having my gearbox sorted another job is replacing the oil cooler to engine gasket.

I noticed the coolant outlet of the oil cooler is blanked off, there is the steel pipe at the back of the engine which goes to the radiator but this isn’t connected, can’t see the bottom of the radiator but guessing this has been blanked off.

Is there a reason for this?

 

Attachments

• 
  IMG_2587.jpeg

  598 KB · Views: 29

Interceptorxj

Well-Known Member

• May 31, 2024

• #2

It's a common modification and factory standard on later TD5s.

 

B

Bugz

Member

• May 31, 2024

• #3

Interceptorxj said:

It's a common modification and factory standard on later TD5s.

Click to expand...

Hi, thanks for your reply.

Would you know the reason for this modification.

 

jamesDiscoTD5

Active Member

• May 31, 2024

• #4

On the later TD5s it feeds the EGR cooler, so if that's been removed or blanked it doesn't do anything.
On earlier TD5s from it went to an inlet on the radiator, but LR brought out an updated radiator design where that inlet was blanked off.

 

B

Bugz

Member

• May 31, 2024

• #5

Bugz said:

Hi, thanks for your reply.

Would you know the reason for this modification.

Click to expand...

 

B

Bugz

Member

• May 31, 2024

• #6

jamesDiscoTD5 said:

On the later TD5s it feeds the EGR cooler, so if that's been removed or blanked it doesn't do anything.
On earlier TD5s from it went to an inlet on the radiator, but LR brought out an updated radiator design where that inlet was blanked off.

Click to expand...

Ok, thanks, was getting a bit concerned!

 

B

Bugz

Member

• May 31, 2024

• #7

Bugz said:

Ok, thanks, was getting a bit concerned!

Click to expand...