G

Goodj19

New Member

• Oct 13, 2013

• #1

Hi there,

After havin my defender stolen I have purchased another but in the mean time got hold of a nice disco auto 300 tdi. Current Defender has 200 tdi fitted already on an 88 will this be an easy conversion?
Also was gonna fit disco axles & transfer box also but would this be a big advantage? Easy enough to fit?

All comments or advice gratefull as have little experience with Land Rovers

Martin

 

cornish rattler

Well-Known Member

• Oct 14, 2013

• #2

Goodj19 said:

Hi there,

After havin my defender stolen I have purchased another but in the mean time got hold of a nice disco auto 300 tdi. Current Defender has 200 tdi fitted already on an 88 will this be an easy conversion?
Also was gonna fit disco axles & transfer box also but would this be a big advantage? Easy enough to fit?

All comments or advice gratefull as have little experience with Land Rovers

Martin

Click to expand...

Hi Martin

It has been done before and is something I have thought about but the tranny box in a disco is slightly different from a defender tranny box and to fit the disco tranny box into a defender you need to chop the chassis about to make the disco tranny box to fit which is a shame as I think it would be a great conversion as I used to love my auto disco

 

tacr2man

Well-Known Member

• Oct 14, 2013

• #3

Have you got a defender (90 or 110 with coil suspension) or a series 88 or 109 with leafs ?
Fitting a disco 300tdi with auto into a defender is simple job , same as axles , and transfer box. The tgb is a bit high geared if used with 750r16 or similar size etc . as its a 1.2 , if you do a lot of motorway its OK , or dont tow much heavy . HTSH

 

G

Goodj19

New Member

• Oct 21, 2013

• #4

Defender 90 with coils

 

tacr2man

Well-Known Member

• Oct 22, 2013

• #5

The disco drivetrain will just bolt straight in apart from needing to put suitable engine mounts onto the 90 chassis to suit the 300tdi . The front prop will fit the disco rear prop wont , and the rear diff in the disco will most likely not have the correct flange for a defender prop. Is the 300tdi auto edc , if it is it will be a bit tricky to get it to work in a defnder if you are not A1 on electrics. Most people just fit a mech 300tdi FIP . HTSH