G

guinness

New Member

• Jan 16, 2007

• #1

hi just had new head gaskets fitted ,heads skimmed and rebuilt after blowing head gasket.
was ok for a few days but have a problem with temp gauge going up and down ,and a small loss of coolent.
will be taking back into the garage just to check over again as work is under warrenty.
cannot see any leaks from hoses or rad and now running out of ideas any body help out there.

thanks

 

clutchdust

Well-Known Member

• Jan 16, 2007

• #2

Could be a small amount of air in the cooling system which wasn't bled out properly or worst case scenario, a porous cylinder liner.

 

E

eightinavee

Well-Known Member

• Jan 16, 2007

• #3

Got it on LPG then ?

 

G

guinness

New Member

• Jan 17, 2007

• #4

hi took it back to the garage they think they found a small leak just below thorttle inlet 2 small pipes ,but may need a new gasket underneath where they connect. if not if it is a liner gone what can i do with it .
thanks will keep you posted