Hi Could anybody please help me with the following problem.

I have the ABS, Hill Descent & Traction Control Lights illuminating with 50yards of moving off. Vehicle is performing as it should.

I have had a wheel stud replaced on the front n/s hub and the lights illuminated after this repair.

I have had the vehicle to an auto electricians today who has told me that all the ABS sensors are reading correctly. He can clear the lights off using the computer, but as soon as I move off, they re-illuminate.

Any help would be appreciated.

could be a wheel bearing. Try doing a search for 3 amigos. Oh and before rest start try intro section

Have searched 3 amigos - will try this

Many Thanks

burnsey999 said:

...........He can clear the lights off using the computer, but as soon as I move off, they re-illuminate.

Any help would be appreciated.

Click to expand...

HI, then he should have told you what fault code was stored... cos that's what he did to clear the lights, erased a fault code, and that fault code is the answer to your question

What did the original mechanic do when replacing the stud?

LR say studs aren't replaceable (full hub needed) but you can get a new one in if you remove the abs sensor and line up the hole with the gap created.

If he did the above he may have either damaged the sensor, knocked dirt inside the hub or not seated the sensor back on properly. All would result in 3 amigos.

We really need the code to do more diagnosis.